Accessories plough Plough Bodies

Accessories plough

Back
 Plough Bodies - KUBOTA
 Plough Bodies - KUBOTA

Excellent Ploughing Quality

They are outstanding:

  • excellent ploughing quality
  • outstanding wear resistance
  • low draft requirements

Bodies of a unique steel.

Kubota bodies are subject to a 12 hours carbonising heat treatment hardening process for:

  • optimum wear resistance (sharp as a diamond)
  • the necessary flexibility to absorb impacts
Kubota-2016-Kv_0251_nr-8-width385

Body No. 8 – “Universal body”

  • for light to heavy soils good trash burial
  • easy pulling

Working depth: 15 to 30 cm (6 to 12”)
Working width: 30 to 55 cm (12 to 22”)
Landside / mouldboard: 40 degree

Kubota-2016-Kv_0251_nr-9_width385

Body No. 9 – “Deep Universal body” 

  • for heavier soils and deeper ploughing
  • well turned and packed furrows
  • easy pulling

Working depth: 15 to 35 cm (6 to 14”)
Working width: 30 to 55 cm (12 to 22”)
Landside / mouldboard: 40 degree

Kubota-2016-Kv_0253_nr-28_width385

Body No. 28 – “Wide tyre body”

  • suits all soils; even heavier soils than body 8
  • very wide empty furrow for tractor wheels up to 710 mm
  • good turning and well packed
  • easy pulling

Working depth: 15 to 30 cm ( 6 to 12”)
Working width: 30 to 55 cm (12 to 22”)
Landside / mouldboard: 40 degree

Kubota-2016-Kv_0252_nr-30_width385

Body No. 30 – “Finger body”

  • for sticky-stony soil and abrasive soils
  • good work in heavier soils
  • best crumbling effect
  • wide furrow bottom

Working depth: 20 to 35 cm (8 to 14”)
Working width: 30 to 55 cm (12 to 22”)
Landside / mouldboard: 46 degree

Kubota-2016-Kv_no34_width385

Body No. 34 – Stickless body for wide tyres

  • Plastic mouldboard
  • Long and slim shape (similar to body 38)
  • For soils with high humus content without stones
  • Advised for tactors with large tyres
  • Easy pulling

Working depth: 12 – 35cm
Working width: 30 – 55cm
Landside / mouldboard: 40 degree

Body No. 38 – Wide tyre body, high

  • Same shape as body No. 28 but higher
  • Suits also wide tractor tyres
  • For shallow to deep ploughing
  • Easy pulling

Working depth: 12 – 38cm
Working width: 30 – 55cm
Landside / mouldboard: 40 degree

Body No. 40 – Wide tyre finger body

  • Same shape as body No. 38
  • Suits also wide tractor tyres
  • For wet, sticky, abrasive, stony conditions
  • Easy pulling

Working depth: 12 – 35cm (5 to 14″)
Working width: 30 – 55cm (12 to 22″
Landside / mouldboard: 40 degree

 

Find a dealer

Locate me

Address

KUBOTA ESPAÑA, S.A
Calle Fernando Alonso, 15,
28914, Leganés, Madrid